Water is life to every industry, starting from the production line or growing communities. But providing the correct quality of water to meet the needs of each is not a simple task. Where it contains high mineral content, suspended solids, fluctuating raw water quality and process requirements all impact effective water management.
ExploreShivsu Watec provides advanced engineered water treatment plant solutions based on your water quality, process requirements and treatment goals. From raw water purification and industrial process water to high-purity water systems, wastewater treatment and desalination, we provide suitable treatment solutions for your different water related challenges.
Whether you are setting up a new facility, expanding production or upgrading an existing plant, we guide and assist you choose a water treatment system that meets your requirements.
Every water source has its own characteristics. In some cases groundwater may contain excess hardness or iron, while surface water may contain suspended particles and organic impurities. Whereas Industrial processes may also require water with specific quality characteristics to meet production needs.
This is why the same treatment system may not be suitable for every application.
Shivsu Watec develops water treatment solutions that are based on raw water analysis, required output quality, plant capacity and intended application. By combining suitable treatment technologies, we provide you with a system that meets your current requirements and can accommodate your future needs.
Shivsu Watec provides advanced engineered water treatment plant solutions based on your water quality, process requirements and treatment goals.
Before raw water can be used for production or other purposes, it needs to be treated to remove suspended solids, turbidity, excess iron, hardness and other impurities from it and also depending on the water source and the quality required, our raw water treatment solutions can include clarification, filtration, softening and disinfection.
When raw water contains high levels of dissolves such as salts and minerals, these reverse osmosis plants can help to reduce them through membrane filtration. Shivsu Watec RO systems are designed for suitable industrial and commercial applications where maintaining the required water quality is important.
In some industrial processes required water must have very low levels of dissolved minerals. With that requirement our demineralization systems can use ion-exchange technology to remove dissolved ions from water and meet specific process water and utility requirements.
Usually hard water can cause scale deposits in pipes, machinery and other equipment, which leads to maintenance and operation problems.Our water softening solutions helps to reduce hardness causing elements such as calcium and magnesium that make them suitable for applications where controlling scale formation is important.
In some applications the removal of all fine particles is not only by using conventional filtration. For that, our efficient Ultrafiltration (UF) used membranes to remove fine suspended particles, colloids and many microorganisms. These UF systems can also be used before reverse osmosis plants to help reduce the load on RO membranes.
Different filters are used to remove different impurities from raw water such as sand filters, activated carbon filters, multimedia filters, micron filters and iron removal filters each address specific water quality problems. Selecting the right combination helps to remove unwanted impurities before further treatment and protects downstream of equipment.
Industrial wastewater contains impurities that may vary depending on the type of industry and the processes that are carried out. It must be treated using methods suited to the pollutants present. Our treatment solutions can include physical, chemical and biological processes, along with additional treatment or recovery stages where it's required.
In places where the freshwater is limited, brackish water or seawater can be treated through desalination that is to make it suitable for the intended use. This system design depends on factors such as salt content, required capacity, water recovery and energy consumption.
A water treatment plant should do more than provide treated water. It should meet the required water quality, suit your daily operations and work according to the needs of your facility.
The treatment system is selected based on your water quality, capacity and application.
The system takes into account the actual conditions under which the plant will operate.
Treatment capacity and system design can be planned around present needs and future requirements.
Different treatment stages can be combined where necessary to achieve the required water quality.
Choosing the right technology and treatment arrangement is an important part of planning a suitable water treatment plant.
Different industries use water for different purposes, and the quality required can vary from one application to another. Shivsu Watec solutions can be designed for:
Since every application has different water quality requirements, the water must be assessed before selecting the appropriate treatment process.
It depends on the quality of your raw water and how much water you need and where you plan to use it. For that a water test can help you to identify the impurities present and determine which type of treatment is suitable for your industry.
Yes. Sometimes, a single treatment process may not be enough to get the required water quality. In such cases you need technologies like filtration,softening, ultrafiltration, reverse osmosis and demineralization can be used together depending on the raw water quality and your needs.
Yes, Shivsu Watec provides water treatment solutions for industries and other applications. We assist you with the right system depending on your water quality, the amount of water you need and the purpose for which you will use it.
Yes, treated water can be reused for different purposes, depending upon its quality. For example, it can be suitable for cleaning, cooling or other industrial uses. In some cases, additional treatment or disinfection can also be needed before the water can be reused.
To get a quotation, you can share details such as your raw water test report, and the amount of water you need, the required water quality and how you plan to use it. These details help us to determine the right treatment process and prepare a proposal that suits your project.
Share your water source, water analysis, required capacity and intended use with the Shivsu Watec team. Our team can help in identifying the suitable treatment process based on your project's requirements.
Contact Shivsu Watec