|
|
|
| |
| |
|
SRM 315, 325, 336, 360 |
|
|
|
|
|
| |
The SRM 3 series fillers are designed to fill a wide range of non-carbonated products. The filler can handle bottles upto 1 litre capacity. High output, sturdy design and reliability are special features of SRM3 series fillers which can be combined with our sealers for crown-corks, roll-on pilfer-proof caps or natural corks.
|
|
|
Salient features :
|
References :
In addition to the above we manufacture Complete Bottling Plants in speeds ranging from 60 BPM to 400 BPM.
|
Ideal for Mineral Water, Fruit Juices, Milk, Wine, Whisky, Brandy, Rum, Gin and similar alcoholic and non-alcoholic products
Sealing with Crown-corks or Pilfer-proof caps
Hot or Cold filling |
|
|
| |
|
RM 240, 250, 260 |
|
|
|
|
| |
Air Containing 21% oxygen is detrimental to the stability and shelf life of beverages. The percentage of oxygen in the bottled product has to be reduced to a minimum since it is a risk for preservation of the bottle beverage. The vacuum pre-evacuation system ensures removal of oxygen during filling to give a packaged product of international standards. Ideal for bottled beverages such as Beer, Cola, Lemonade and Champagne.
These Filling machines incorporate the latest in filling technology for carbonated beverages. The filling technology for carbonated beverages. The filling valves are designed to prevacuate the bottles before filling.
This ensures very low oxygen content in the product as per international standards, and hence high stability and shelf life. The valves are suitable for filling under CO2 Counter Pressure. While using CO2 prestressing, one-third Air Consumption will be replaced by CO2 The equipment has cleaning in place facility (CIP). The equipment has an automatic central lubrication system. The machine has safety cut off switches, automatic splinter spray-off system, height adjustment of bowl suitable for all bottle size upto 1 litre. These filling machines are designed for accurate level filling without beverage loss.
|
Technical Specification :
Data |
RM 240 |
RM 250 |
RM 260 |
Capacity
- for 650 ml Beer bottles
- for 250 ml soft Drinks bottles |
12000 BHP (max.)
18000 BHP (max.)
|
15000 BHP (max.)
21000 BHP (max.)
|
18000 BHP (max.)
25000 BHP (max.)
|
Filling Points |
40 |
50 |
60 |
Sealing elements |
10 |
10 |
12 |
Kind of sealing |
Crown closure |
Crown closure |
Crown closure |
Bottling pressure |
Max.6kg/cm² |
|
|
Fill temperature |
4°C |
|
|
Installed Power |
10KW |
12KW |
15KW |
Water Consumption |
1 m³/hr |
|
|
Air consumption |
30 m³/hr |
40 m³/hr |
50 m³/hr |
Weight |
7000kg |
8000kg |
9000kg |
Dimensions (M)
(1xwxh) |
5.4x2.3x2.8 |
5.4x3x2.8 |
5.4x3.5x2.8 |
Bottle Dimensions |
Height 150 to 350 mm |
Dia. 50 to 90 mm |
|
|
|
Splinter Spray
Filler Back View
Crowner
Filler Front View
|
Salient features :
|
|
We also manufacture Washers, Premix Carbonators, Crate Washers, Cap Conveyors and other Bottling equipments. |
|
Manufacturers of Automatic Bottling Plants in
technical collaboration with NAGEMA Germany.
|
|
| |
PIONEERS IN WATER TREATMENT TECHNOLOGY
|
Installed more than 5000 plants globally |
|
|
Filling Machines | Solution
for Plastic and Packaging |
|
|
| |
© Copyrights CANADIAN CLEAR 2007, All Rights Reserved.
|
Powered By : Pathfinder |
|
| |
|
